Microcompounding and Injection Molding System Including Tender

• Country: Germany
• Summary: Microcompounding and Injection Molding System Including Rheological Analysis
• DET Ref No: 136997842
• Deadline: 07 Apr 2026
• Financier: Self Financed
• Purchaser Ownership: Government
• Tender Value: Refer Document
• Notice Type: Tender
• Document Ref. No.: OV 04-26
• Purchaser's Detail:
  Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details.

  Login to see details
• Description:
• Microcompounding and injection molding system including rheological analysis for research at the WHZ with the following requirements: 1. Extruder 1.1 Benchtop device without active fan 1.2 external temperature control system for liquid cooling of the electronics and the Powder dosage 1.3 Weight of the basic device: m 60 kg 1.4 dimensions of the basic device: max. 450x500x850 mm (hxwxl) 1.5 number of screws: 2, co-rotating 1.6 screw diameter: 11 mm 1.7 segmented screw design for adapting the screw as required screw zones 1.8 3 sets of screw elements, one of which has a high free volume: min. 1.7 outer/dinner for feeding pellets ?4mm 1.9 barrel length: 40 l/d 1.10 possibility of shortening the used process length to up to 15 l/d 1.11 upper barrel half can be completely opened and dismantled 1.12 all dosing and degassing openings can be freely positioned 1.13 2 water-cooled filling funnels for feeding powdered materials, along the process length 1.14 min. 2 dosing openings compatible with different dosing systems 1.15 degassing opening with the option for passive or active degassing using a vacuum pump 1.16 process temperature range from room temperature to 450 °c individually controllable in at least 7 heating zones 1.17 integrated pressure and torque monitoring and temperature measurement on the nozzle 1.18 screw speed ?1000rpm, variably adjustable 1.19 throughput: ?0.02 kg/h to ?2.5 kg/h 1.20 bypass valve on the nozzle for sampling 1.21 extrusion nozzle with replaceable strand nozzles (diameter: 0.5 1.0 1.5 2 2.5 and 3.0 mm) 1.22 slot die for extruding films with a width of ?50 mm and an adjustable thickness in the range 0.2 to 1.2 mm 1.23 power supply: 230 v with cold device plug 2. volumetric solids dosing system 2.1 including fastening device 2.2 single screw dosing 2.3 conveying pellets and powder 2.4 integration of the control into the extruder software 3. volumetric liquid dosing system 3....
• Documents:

 Tender Notice